Advice

How to calculate severance pay in construction

Techtime10 min read

Employee leaving the company with a box of belongings: severance pay in construction

Please note: this article refers to French regulations and standards.

According to key figures from Independant.io, 10% of small building businesses (micro-enterprises and SMEs) planned to lay off staff in 2024, or at least not to renew some contracts. This at a time when 71.5% of construction companies were struggling to recruit and investment reached €296.2 billion in 2023. Several difficulties explain this trend, however, such as rising raw material prices or new energy regulations.

Even when a company is under severe cash-flow pressure, parting with its best builders is always heartbreaking. And this separation is not without consequences for the employer, who must pay severance pay to former employees. How do you calculate it based on length of service or reference salary? What applies between the French Labour Code and the building sector collective agreements?

In brief

In French construction, an employee dismissed from a permanent contract receives severance pay from 8 months’ service, except in cases of serious or gross misconduct. Statutory severance is ¼ of a month’s salary per year up to 10 years, then ⅓ beyond. The building sector collective agreements have their own scales for manual workers, ETAM and managers: the employer applies whichever amount is more favourable to the employee. The calculation depends on status, length of service and reference salary.

1Severance pay in construction: statutory or collective agreement?

There are two legal frameworks entitling a building employee to severance pay. By default, article L1234-9 of the French Labour Code provides a minimum amount for any employee on a permanent contract, provided they meet the following conditions:

  • Have at least 8 months’ service.
  • Not have committed serious or gross misconduct, as listed on the Service Public website. In construction, this could mean committing theft on the worksite or breaching safety rules. Nevertheless, an employee dismissed for misconduct keeps their other rights, such as unused paid leave or payment in lieu of that leave.

However, the severance provided for in the employment contract or collective agreement applies if it is considered more favourable. The more advantageous conditions are mainly found in length of service or the amount of the reference salary.

2The 3 criteria for determining severance pay

The amount of severance pay in construction depends on several criteria, all governed by the Labour Code and the building sector collective agreements. The employee’s status (manual worker, ETAM, manager), length of service and reference salary are the three main parameters.

The employee’s status

In construction, an employee may be a building worker, ETAM (clerical, technical and supervisory staff) or a manager (such as site managers). Each category has its own rules in the national collective agreement, generally more favourable than the Labour Code.

Taking length of service into account

Length of service, set at a minimum of 8 months by law, corresponds to periods of uninterrupted work for the same employer. This means that some periods of absence are not counted, such as sick leave or part of parental leave. In the latter case, only half the leave counts towards the severance calculation, unless the collective agreement provides for more favourable terms.

If a year is incomplete, severance is calculated in proportion to the number of complete months worked. If the employee has held several employment contracts with several companies in the same group, previous service does not in theory count either. Of course, contractual or collective-agreement provisions are exceptions, as are co-employment situations (Weblex).

That said, the building sector collective agreements allow the following periods of absence to be taken into account (FFB):

  • Periods of compulsory military service;
  • leave due to accidents;
  • exceptional authorised absences.

Calculation based on the reference salary

There are two methods for determining the reference salary used as the basis for severance pay. Article R1234-4 of the Labour Code provides for the higher of the two results to be used:

  • The average of the last 12 months’ gross pay before dismissal. If dismissal occurs in the first year of the contract, the average covers all months worked.
  • The average of the last 3 gross salaries paid before notification of dismissal.

In the event of sick leave, severance is based on the period before the absence. Otherwise, certain sums are included in the reference salary if they are paid on a mandatory basis. Conversely, other benefits are excluded if they are considered optional under the law or the employment contract (Juritravail).

Items included in the reference salary (subject to social security contributions)Items excluded from the reference salary
• commissions;
• back pay within the reference period;
• paid leave allowances;
• mandatory bonuses or gratuities provided for in the collective agreement or contract (holiday bonus, 13th month, year-end bonus, etc.)
• reimbursement of business expenses;
• payment in lieu of paid leave;
• profit-sharing payments;
• optional and/or one-off bonuses.

3Example of a severance calculation under the statutory framework

If you only apply the Labour Code, the minimum severance pay is calculated as follows:

  • If your employee has between 8 months and 10 years’ service, severance is a quarter of a month’s reference salary per year of service. An employee earning €2,000 gross per month with 5 years’ service will therefore receive €2,500 in severance. The calculation is: €2,000 × ¼ × 5.
  • If your employee has more than 10 years’ service, you take a quarter of a month’s salary per year up to 10 years of service, then add a third of a month per additional year. An employee with 15 years’ service and a gross monthly salary of €2,000 will therefore receive severance of €8,333. The calculation is: €2,000 × ¼ × 10 + €2,000 × ⅓ × 5.

If the employee has alternated between full-time and part-time work, you apply proportionality according to the periods worked. For example, an employee works 4 years full time, then moves to part time for 2 years (80% of the legal working week). Their pay is first €2,100, then falls to €1,680. Their severance is calculated as follows:

  • Years worked full time: 2,100 × ¼ × 4 = €2,100;
  • Years worked part time: 1,680 × ¼ × 2 = €840;
  • Total severance = 2,100 + 840 = €2,940.

The same principle applies to severance under a collective agreement or contract.

Diagram Statutory or collective-agreement severance: the more favourable applies
Statutory severanceArticle L1234-9 of the Labour Code
  • From 8 months’ service on a permanent contract
  • ¼ of a month’s salary per year up to 10 years
  • ⅓ of a month per year beyond
Collective-agreement severanceBuilding sector collective agreements
  • From 2 years’ service
  • Separate scales for manual workers, ETAM and managers
  • 10% increase after age 55 (manual workers, ETAM)

4Examples of severance calculations under the collective agreement

When a building company is covered by a building sector collective agreement, national or regional, it applies its provisions to the employees entitled to them. Each category has its own length-of-service criteria for determining the amount of severance. If the employee meets none of the criteria below, the statutory provisions automatically apply.

Severance pay for a construction worker

Article 10.3 of the national collective agreement for building workers provides for severance from 2 years’ service. A 10% increase is applied to the total if the employee is aged 55 or over.

Building worker’s length of serviceCollective-agreement severance
Less than 2 yearsNo severance
2 to 5 years1/10 of a month’s salary per year
5 to 15 years3/20 of a month’s salary per year
More than 15 years3/20 of a month’s salary per year up to 15 years, then 4/20 beyond

So a worker with 10 years’ service earning €1,800 gross per month will receive collective-agreement severance of €2,700:

  • Collective-agreement severance = 3/20 × 1,800 × 10 = €2,700.
  • Statutory severance = ¼ × 1,800 × 10 = €4,500.

We can see that statutory severance is more favourable for manual workers than collective-agreement severance. However, unlike the statutory scheme, the agreement takes non-occupational sick leave into account when calculating length of service.

Severance pay for ETAM (clerical, technical and supervisory staff)

Article 51.1 of the national collective agreement for building ETAM sets the amount of severance according to the following lengths of service:

ETAM length of serviceCollective-agreement severance
Less than 2 yearsNo severance
2 to 15 years2.5/10 of a month’s salary per year
More than 15 years2.5/10 of a month’s salary per year up to 15 years, then 3.5/10 beyond

The reference salary is the last month’s pay before the date of notification of dismissal. It is increased by 1/12 of the total variable items (bonuses, commissions, etc.) received over the last 12 months.

The total is also increased by 10% if the employee is over 55. So, as with construction workers, collective-agreement severance is not more favourable for clerical, technical and supervisory staff either, unless they have long service or the age-related increase, as the calculations below show.

Take an ETAM with 13 years’ service and a gross monthly salary of €2,600 before receiving notification of dismissal. Their theoretical severance would be as follows:

  • Statutory severance = ¼ × 2,600 × 10 + ⅓ × 2,600 × 3 = €9,100
  • Collective-agreement severance = 2.5/10 × 2,600 × 13 = €8,450
  • Collective-agreement severance if the ETAM is over 55 = 1.10 × 8,450 = €9,295

However, the agreement sets a cap of 10 months’ gross salary on the maximum severance paid to construction ETAM (Éditions Tissot). This avoids excessive differences between employees according to length of service, as well as too heavy a financial burden for companies. For example, an ETAM with 35 years’ service would in theory receive 10.75 months’ gross salary in severance:

  • Total months = 15 × 2.5/10 + 20 × 3.5/10 = 10.75 months’ salary

But as this exceeds the limit, they will only receive severance based on 10 months’ gross salary.

Severance pay for a construction manager

Article 7.5 of the national collective agreement for construction managers sets out the calculation in the following bands:

Manager’s length of serviceCollective-agreement severance
Less than 2 yearsNo severance
2 to 10 years3/10 of a month’s salary per year
More than 10 years3/10 of a month’s salary per year up to 10 years, then 6/10 beyond

As for ETAM, the reference salary is the last salary received before notification of dismissal. However, the maximum severance cap for long service is set at 15 months for managers. A 10% increase applies for managers aged over 55 at the time of dismissal.

So a manager with 15 years’ service earning €3,310 gross per month before notification of dismissal will receive the following:

  • Statutory severance = ¼ × 3,310 × 10 + ⅓ × 3,310 × 5 = €13,791.7
  • Collective-agreement severance = 3/10 × 3,310 × 10 + 6/10 × 3,310 × 5 = €19,860

In all cases, collective-agreement severance is more favourable than statutory severance for construction managers. However, the 15-month cap applies once the manager reaches 30 years’ service. Indeed:

  • Total months = 3/10 × 10 + 6/10 × 20 = 15 months’ gross salary.
Diagram The article’s three examples: statutory or collective agreement? € of severance — worker: 10 years at €1,800 · ETAM: 13 years at €2,600 · manager: 15 years at €3,310
Worker — statutory
4,500 €
Worker — agreement
2,700 €
ETAM — statutory
9,100 €
ETAM — agreement
8,450 €
Manager — statutory
13,792 €
Manager — agreement
19,860 €

5Conclusion

Dismissing an employee is not just a simple departure. The process is governed by the Labour Code and the construction collective agreements, so that the employer pays the correct severance pay. Calculating both amounts is advisable, as the more favourable one is always used, to help the former employee move on with peace of mind.

Construction business owners large and small, react quickly when your order books for construction or renovation shrink. Optimise your costs and make your production profitable with Techtime, our web and mobile worksite management app. Take advantage now of its new worksite sharing between companies feature to draw real strength from your professional network.

Frequently asked questions

Here are some of the questions most often asked by construction employees and employers researching severance pay. The answers below come mainly from Empowill.

Is severance pay in construction subject to social security contributions?

Severance pay is exempt from social security contributions, provided it is not part of a job protection plan (PSE). It must also reach the mandatory minimum and not exceed twice the annual social security ceiling.

What are the differences between the national collective agreement and regional provisions?

Regional collective agreements add some benefits not found in the national construction collective agreement. These mainly concern:

  • the cost of living in certain regions (especially Île-de-France);
  • the high frequency of worksite contracts;
  • difficult or extreme working conditions (heatwaves, frequent bad weather, high altitude, etc.).
How can you check your construction employer’s calculations?

Keep your payslips and employment contracts to check your employer’s calculations. Pay particular attention to whether all bonuses have been included in the reference salary, and whether all periods worked have been counted towards length of service.

How do you challenge the amount of your severance pay?

If you notice an error or have any doubt, we recommend following these steps in order:

  • Contact your employer directly with a courteous written request.
  • Turn to your union representatives, who will check the calculations and seek an amicable settlement with the employer.

Refer the matter to the employment tribunal (Conseil de prud’hommes) if no agreement can be reached, after gathering all your contracts and payslips.

Free trial

Sign up in under 47 seconds

No commitment, and you gain your superpowers: 14 days to try Techtime with your teams.

Yes, I’m flying: sign me up
Illustration: three people in superhero capes on a building under construction, between two cranes