In construction, profitability depends on tight control of worksite costs in the face of fiercer competition and project hazards. According to the French Building Federation (FFB), the average operating margin rate of construction companies stood at 19.5% in the fourth quarter of 2024, down 1.5 points year on year. This decline is mainly due to a 1.1% rise in production costs that was not fully passed on in prices. This figure covers the whole sector, from SMEs to large companies, so it does not reflect a tradesperson’s actual margin.
Nor should this operating margin rate be confused with the worksite gross margin, which tradespeople use to price their quotes and manage the profitability of their work.
Techtime guides you through calculating the markup rate on your worksites, and explains the difference between markup rate and margin rate.
In brief
The markup rate on a worksite is calculated by dividing the gross margin excl. VAT (selling price excl. VAT minus cost price) by the cost price, then multiplying by 100. Example: a house sold for €192,000 excl. VAT with a cost price of €153,600 excl. VAT generates €38,400 of gross margin, i.e. a markup rate of 25%, but a margin of 20% of the selling price. The margin rate is calculated on the selling price: it is always lower than the markup rate. A building company can aim for a gross margin of 20 to 35% of revenue.
1What is the markup rate in construction?
As in other sectors, the markup rate reflects the gross margin generated on a worksite, before financial charges and taxes are taken into account. This gross margin takes into account all direct costs, such as labour, materials and subcontractors. Indirect costs are also included in the form of overheads and administrative costs.
According to estimates published by Modeles Business Plan, direct costs account for 70 to 85% of total revenue, including:
- 35 to 50% for materials;
- 30 to 40% for labour;
- 10 to 15% for subcontracting.
This financial indicator, expressed as a percentage, is a key factor in determining the company’s break-even point. The lower production costs are relative to the amount invoiced, the higher the markup rate. With healthy finances like these, the business owner can set prices better and adjust strategy to sustain growth.
Also according to Modeles Business Plan, a building company can aim for an average gross margin of between 20 and 35% of revenue, depending on its activity and cost structure. This leeway is needed to cope with possible hazards, such as the impact of the weather on worksites. These ratios vary widely depending on the trade and the size of the company.
2How do you calculate a markup rate in construction?
The markup rate in construction depends on the gross margin and the cost price. These are among the key indicators used to calculate worksite prices and margins.
The cost price is the total cost of the worksite. As defined by Obat, it is obtained by adding the total outlay, made up of direct costs (materials, labour, subcontracting) and site costs, to the company’s overheads (fixed and variable costs). Fixed costs are structural costs such as salaries, insurance, water or electricity bills, etc. Variable costs add to direct costs in the field, such as travel, overtime, small consumables, etc.
The gross margin excl. VAT is the difference between the selling price excl. VAT and the cost price. The company involved in the project sets the selling price according to the profitability it wants to achieve. To set its selling price, the company applies a markup coefficient to the cost price. For example, to aim for a gross margin of 20% of the selling price, the coefficient applied will be 1.25 (1 ÷ 0.80).
The markup rate on a building construction project is obtained by dividing the gross margin excl. VAT by the cost price. Expressed as a percentage, the result corresponds to the number of cents of gross profit generated for every euro spent.
Example: the selling price of a small 120 m² detached house is set at €192,000 excl. VAT. The cost price is 80% of that price, i.e. €153,600 excl. VAT. The gross margin excl. VAT is therefore the remaining 20%, i.e. €38,400.
Gross margin excl. VAT = selling price excl. VAT − cost price = 192,000 − 153,600 = €38,400
The markup rate is calculated as follows:
Markup rate = (gross margin excl. VAT / cost price) × 100 = (38,400 / 153,600) × 100 = 0.25 × 100 = 25%
For every euro spent building this house, 25 cents of gross profit are generated.
So a 20% margin on the selling price corresponds to a markup rate of 25%, because the markup rate is calculated on the cost price, not on the price invoiced.
Good to know: each contractor on the same worksite calculates their own markup rate after completing their tasks. Under a global contract or with a general contractor, the client pays for the various services with a single overall price.
Note: if company A subcontracts part of the worksite to tradesperson B, it adds its margin on top of the tradesperson’s price. If the selling price excl. VAT of a work package is set at €20,000 and tradesperson B invoices €12,000, company A decides to bear €2,000 of costs. Its gross margin is therefore 20,000 − (12,000 + 2,000) = €6,000.
- 1Selling price€192,000 excl. VAT
- 2Cost price€153,600 excl. VAT (80%)
- 3Gross margin€38,400 excl. VAT
- 4Markup rate38 400 / 153 600 = 25 %
- 5Margin on price20% of the selling price
3What are the differences between the markup rate and the margin rate?
The margin rate is the profit forecast made by the company after paying its production costs. It measures the percentage of gross margin relative to the revenue generated. It is used to assess the company’s profitability and adjust selling prices to maintain, or even improve, the company’s competitiveness.
This financial indicator is often confused with the markup rate, yet the two do not serve the same purposes:
- The markup rate takes into account the overall cost price, including labour, equipment, site costs and overheads needed for the worksite. The margin rate is based on the selling price of the same goods;
- The markup rate measures a company’s profitability from an internal point of view. The margin rate is used to set or negotiate selling prices for a client;
- The markup rate is relevant when acquiring materials, as well as buying or hiring worksite equipment. The margin rate is used in marketing and in calculating list prices.
Good to know: for the same worksite, the margin rate is always lower than the markup rate.
- Based on the overall cost price
- Measures profitability internally
- Useful for buying materials and equipment
- Based on the selling price
- Used to set or negotiate prices
- Always lower than the markup rate
Want to stop getting mixed up in the rich and varied vocabulary of construction? Find out how to tell the difference between a project manager and a client.
What mistakes should you avoid when calculating a margin?
Calculating a margin must be rigorous to ensure a degree of stability or growth for your company. As Habitat Presto points out, building contractors make these common mistakes when trying to work out their profitability:
- Underestimating the time needed to complete the worksite, to the point of having to revise the worksite schedule;
- Forgetting to include certain fixed costs such as software subscriptions, bank charges or equipment depreciation;
- Not anticipating hazards such as weather, incidents or late deliveries;
- Underestimating the cumulative effect of small price differences on materials or overtime in construction, which end up significantly eroding the actual margin
This can have concrete consequences such as:
- loss of cash flow,
- difficulty paying yourself,
- dependence on the bank.
Example: a recurring underestimate of 30 minutes a day can add up to several thousand euros of lost margin over a year.
An overly optimistic labour estimate can reduce a worksite’s margin, even when material purchases stay within budget. To spot this gap, compare the hours planned in the quote with the time your teams actually spend on the work.
With Techtime timesheet management, your technicians enter their time from the mobile app. Entries are centralised in the web software. You then have the information you need to compare the hours reported with your initial estimate, without having to collect everyone’s paper timesheets.
This data helps you analyse time differences and refine your next estimates. However, it is not enough to determine the full margin on the worksite: labour costs must be compared with material purchases, subcontracting and other costs in your profitability tracking.
4How do you increase your gross margin?
Want to increase your profitability to keep your building company afloat or secure its growth? Some general management strategies, described in particular by Indy, can be adapted to construction depending on your organisation and cost structure:
- Raise selling prices in small steps, provided you can justify premium quality and customer service;
- Reduce direct purchasing costs by grouping orders or negotiating volume discounts. This is the least risky option;
- Optimise stock management to prevent stock from going out of date.
- Reduce downtime by planning jobs precisely day by day and checking that the necessary materials are available
- Better worksite preparation, with a detailed and realistic estimate, identification of sensitive points (access, co-activity, technical constraints) and validation of actual installation times observed on similar worksites.
- Limit remedial work and defects by clarifying expectations from the outset, setting up interim checkpoints and learning from past mistakes.
To limit downtime, Techtime includes an equipment catalogue among its features. Your tradespeople can see which tools and vehicles are available in real time, and who is using them at any given moment.
5Conclusion
The margin is one of the most strategic financial indicators for building companies. With production costs rising and hazards liable to hit profitability quickly, calculating and optimising your markup rate is essential for making the right decisions.
To maintain lasting profitability, the margin must be tracked worksite by worksite and reassessed throughout the project, not just at the end of the financial year.
Techtime helps you centralise the hours reported by your teams to better understand the time spent on each worksite. By comparing this data with your labour costs, you can check whether the time actually spent matches your forecasts. This tracking complements the analysis of your other expenses and gives you concrete benchmarks for preparing the next worksites.
However, if you are having any difficulty running your business, do not hesitate to contact us. We offer a support service for tradespeople and construction company managers. This tailored programme is delivered by experts in business coaching. Book an appointment.
Frequently asked questions
How do you calculate the markup rate on a worksite?
First calculate the gross margin excl. VAT: selling price excl. VAT minus cost price. Then divide it by the cost price and multiply by 100. For a selling price of €192,000 excl. VAT and a cost price of €153,600 excl. VAT, the gross margin is €38,400 and the markup rate 25%.
What is the difference between markup rate and margin rate?
The markup rate is calculated on the cost price and measures profitability internally. The margin rate is calculated on the selling price and is used to set or negotiate prices. For the same worksite, the margin rate is always lower than the markup rate.
What mistakes should you avoid when calculating the margin?
Underestimating the time needed for the worksite, forgetting certain fixed costs (software subscriptions, bank charges, etc.), not anticipating hazards (weather, incidents, late deliveries) and overlooking the cumulative effect of small differences on materials or overtime.






